DAKOTA MX SERIES

DAKOTA SERIES MX GROUP 

With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

SPECIFICATIONS

PHYSICAL

 

  • Weight: 10 ounces
  • Size: 2.5 W x 4.75 H x 1.25 D inches.
    63.5 W x 120.7 H x 31.8 D mm
  • Operating Temperature: -20 to 120F (-20 to 50C)
  • Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

KEYPAD

  • Sealed membrane that is resistant to both water and petroleum products.
  • Six tactile-feedback keys.

TRANSDUCER

  • Dual element (transmit and receive)
  • 1 to 10 MHz frequency range.
  • Locking quick disconnect Lemo connectors
  • 4 foot cable
  • Custom transducers available for special applications
POWER SOURCE

 

  • Two 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.

DISPLAY

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
  • Bar graph indicates stability or reading.

CERTIFICATION

  • Factory calibration traceable to national standards.

WARRANTY

  • 5 year limited.
MEASURING

 

  • Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
  • Switch to select English or metric units.
  • Resolution: 0.001 inch (0.01 millimeter)
  • Velocity Range: .0492 to .3937 in/m s. 1250 to 10,000 meters/sec
  • Built-in: Stainless steel reference disk for probe zeroing.
  • Four readings per second for single point measurements or 16 per second in SCAN mode.

 

 


  • mitutoyo-tool-500x500.jpg
    ผลิตภัณฑ์จาก MITUTOYO JAPAN ปลีกและส่ง จัดส่งทั่วประเทศ